AMC iM05 - Studio Monitor Speakers and Home Automation Mutli-Zone Speakers



Technical Specifications
  • Type:  2-way studio reference monitors&Architectural Speakers
  • LF Driver:  5-inch cone with high temperature voice coil and damped rubber surround
  • HF Driver:  Specially developed dome with magnetic shielding
  • Frequency Response:  56Hz - 22kHz
  • Crossover Frequency:  3kHz
  • LF Amplifier Power:  40W
  • HF Amplifier Power:  30W
  • S/N Ratio:  > 100dB typical A-weighted
  • Input Connectors:  1 x XLR balanced input connector, 1 x TRS balanced/unbalanced input connector
  • Polarity:  Positive signal at + input produces outward LF cone displacement
  • Input Impedance:  20k ohms balanced, 10k ohms unbalanced
  • Input Sensitivity:  85mV pink noise input produces 90dBA output SPL at one meter with volume control at maximum
  • Protection:  RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external main fuse
  • Indicator:  Blue power on/off indicator on front panel
  • Power Requirements:  factory programmed either 115V~50/60Hz, 230V~50/60Hz or 100V~50/60Hz
  • Cabinet:  vinyl-laminated high acoustic efficiency MDF
  • Dimension:  250 mm (H) x 176 mm (W) x 200 mm (D)
  • Weight:  5kg/unit (without packing)
*Above specifications subject to change without notice
AttachmentSize
AMC iM05 User Manual1.04 MB
iM05 technote - RCA to TRS connection125.85 KB
IM05 front 2MP.jpg279.95 KB
IM05 back 2MP.jpg220.96 KB
IM05 side 2MP.jpg219.06 KB