Click to Enlarge




Specification for TP2

Kernel
CPU............................ PXA270 312MHz (520 MHz as option.)
Graphic...................... Chip Intel 2700G3/G5 w/ 32MB VRAM ( 2700G5 as default)
SDRAM....................... 64/128MB (64MB as default)
Boot Flash.................. 1MB NOR flash
Storage Flash............. 128/256MB M-sy stems G4 flash (128MB as default)
RTC............................ Y(HT1381)
RTC battery................. 65mAh rechargeable li-ion DIP type coin battery. On board
                                    w/ charging circuit
Watch Dog.................. PXA270 built-in
Reset........................... Built-in HW reset button
Power Management.... Normal/idle (The idle mode turn off the LCD back light)

LCD&Touch-Screen
Panel............................ 7.0’ 18-bits TFT panel
Resolution.................... 16:9 800(W)x480(H)
Brightness..................... 400 nits (Adjustable by S/W)
Touch-Screen................ 4-wire resistive panel

I/O
COM.............................. COM1 : FF transceiver level RS232
                                       COM2: RS485 transceiver level
                                       COM3: full function TTL/transceiver level RS232. Default
                                       is transceiver level. (Defined in Expansion conn.)

USB Host........................ 3 x USB 1.1 host ( USB host from PXA270 w/ USB hub design)
                                        - 2 x type A conn
                                        - 1 x thru Expansion conn.
LAN................................. 1 x 10/100 Ethernet port w/ speed/link LEDs
T/S.................................. 4 wires resistive type T/S I/F
Line-out.......................... AC97 codec for Line-out
Mic-in.............................. AC97 codec for Mic-in
Speaker-out.................... AC97 Audio codec w/ 2 watt audio amplifier for 1.5 watt speaker
Expansion conn.............. - The following signals in expansion conn.
                                         5V IO power, 3.3V IO power, GND, Line in, Mic-in, I2C
                                         ( SM bus ), Full-function TTL level RS232, 4 DI/4 DO/8HK,
                                         one port of USB-A. The X1 pin definition/connector type in
                                         TP2 series should follow the same specification.
Digital Inputs................... 4 ports DI (Defined in Expansion conn.)
Digital Outputs................. 4 ports DO(Defined in Expansion conn.)
Hotkey.............................. 8 x hotkey I/F. (Defined in Expansion conn.)
I2C ( SM bus )................... Yes (Defined in Expansion conn.)
IR Receiver...................... Coupled with UbiQ-310
Status LED........................ 5x status (Power status, security, message, remote control, reminder)

Storage and expansion
SD/MMC............................ Yes

Power
DC-in................................. 10~28V DC-in by phoenix conn. with fuse-protection
Power Switch.................... Slide-type

Environmental&Physical
Operating Temperature...... 0~50 degree C
Storage Temperature......... -20~70 degree C
Certification........................ UL, FCC/CE, Class B
RoHS Compliant................. Yes

Attachment	Size
TP2 Front	53.25 KB
TP2 Back	72.76 KB
TP2 Dimensions	81.21 KB
TP2 I/O Drawing	48.84 KB
TP2 User Manual	2.18 MB